CD1-Electric hoist Introduction:
Type CD1 (MD1), wire-rope electric hoist is a kind of small-lifting equipment, it can be mounted on single beam overhead crane, gantry cranes, jib type CD1 (MD1). Electric hoist as only one normal speed which can satisfy normal application.It is widely used in factories, mines, harbours, warehouses, cargo storage area and shops, essentially in raising working efficiency and improving working conditions.
1.CD1andMD1seriesofsteel-ropeelectrichoistareimprovedonesonthebasisoftheoriginalCDandMD.
2.Tightstructure,smartbody,safetyandreliability,commom
usedparts,strongliftingcapacity,easymaintance.
3.Thehoistsexistsinformofstationarystyleandcrab-style.
4.Theproductsarewidelyatindustrialoreenterprises,railway,harbors,warehousesandmaterialssitesetc.
5.Workingenvironment:nofire,noexplosivedanger,nocorrosivemediaandnodirtexist.
6.Workingtemperature:-25°C~+40°C,Wetnessislessthan85%.
7.380v/50Hz/3Phases
8.Mainlyconsists3parts:liftingmechanism,travelingmechanismandelectricalequipment
9. Withslightmodification,italsocanbeuseasawhich.
10. ElectricwireropeHoistisassembledbyseveralparts:
Motor
Hoist Motor is a taper type rotor motor with braking;it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.
Gear Box
Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.
Wire Rope
Hoisting rope comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
Rope Drum
Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.
Electric apparatus controlling system
Model CD1 or MD1 is composed of the contactor box, controlling switch, cut-off limiter. The working voltage of controlling switch is 380V, 36V or 24V (safety voltage).
Rope Guide
Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of our company is thicken and dilated, so that it is not easy to be damaged.
Hook
The hook block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing. The pulley is thicken and dilated than domestic common
CD1-Electric hoist Parameters:
Operation Motor Model
High quality material:
1.Electrical equipment:Schneider Control box material:Q235B2.Motor:Nanjing special electric3.Bearing:Ha‘erbin Bearing4.Gear:20Chromium manganese titanium5.Hook:40 chrimium forge6.Wire rope:Guizhou Julong limited liability company7.Transmission shaft:45#quenched and tempered steel8.Cover and coiling block:thicken steel plate
Hoists Enquiry information need:
1. Capacity
2. Lifting height
3. Lifting speed and running speed requirement.
4. Power supply
5. Any other special requirement you need,like I beam type
Note1. We only manufacture the high quality hoist2. Different power supply available3. OEM4. Color variety
Packaging and dliverydetail
Cartons or wooden cases,on pallets,and we can also make the packing according to buyers request
15 day after payment
Outstand Service
We can provide not only amazing products,but also special ones designed at requests.We’ll do our best to meet the need of customers.